|
|
 |
 |
|
M-Audio StudioPro 3 Desktop Audio Monitors |
|
|
|
|
|
Recording engineers and music producers around the world rely on M-Audio reference monitors to insure that their mixes are accurate. The StudioPro 3 active monitors bring that same standard of audio fidelity right to your desktop. Custom-tuned cabinets, optimized speaker design, and advanced crossover technology combine with generous built-in amplification to deliver the best sound you can get in monitors this size. Complete with magnetic shielding to prevent interference with computer and video monitors, StudioPro 3 speakers deliver great audio experiences from your music and multimedia applications. They’re also great for traveling.
Features
•3.25” low-frequency drivers;1” high-frequency drivers
•Self-powered
•Remarkably accurate frequency response and imaging
•Advanced crossover design
•Custom-tuned wood cabinet
•Magnetic shielding prevents computer/video monitor interference
•Vented port design for added bass
•Transportable, compact design is ergonomic and flexible
•Internal standing wave acoustic absorption for greater efficiency
•Bass Boost switch
•Factory programmed for worldwide use
•RCA rear-panel inputs; convenient front-panel 1/8” inputs
•Includes directional stands to optimize listening “sweet spot”
Specs
•HF driver: 1-inch diameter, magnetically shielded silk dome
•LF driver: 3.25-inch diameter, magnetically shielded with curved cone with high-temperature voice coil
•Dynamic power: 10 watts into 4 Ω (per channel) at 0.5% distortion
•Dynamic Range (Maximum Signal-to-Noise Ratio): >80dB (typical, A-weighted)
•Crossover frequency: 2.3Khz
•Signal-to-noise ratio: >90dB (typical, A-weighted)
•Input impedance: 10k Ω (unbalanced)
•Input connectors: RCA
•Input Sensitivity: 100mV pink noise input produces 90dBA output SPL at 1 meter with volume control at maximum
•Protection: RF interference, output current limiting, over temperature, turn on/off transient, subsonic filter
•Indicator: Blue power LED ring around on/off/volume knob on front panel
•Power Requirements: 100-120V~50/60Hz, 220~240V~50/60Hz; powered via detachable 2-conductor line cord
•Dimensions/Weight: 7.9" (H) x 5.5" (W) x 5.9" (D), 8.8 lbs./pair (approx., without packing)
|
|
|
|
|
|
|
